106-L，M，MH和H型臭氧监测仪零件

Air Pump for Models 106-L, 106-M, and 106-MH Ozone Monitors

SKU: OZPUMP106LMMH

Flow Meter Assembly for Model 106-L, 106-M, and Model 106-MH Ozone Monitors (Surface Mount)

SKU: FLOWMETER106LMMH

Installation of this flow meter requires soldering to the printed circuit board. Please contact 2B Tech if you would like for us to make this repair for you: sales@twobtech.com

Needle Valve for Flow Control

SKU: NDLVLV

Lamp Assembly for Model 106-L Ozone Monitors

SKU: OZLAMPAS106L

Includes wiring, connector, and mounting strap.

Lamp Assembly for Model 106-M Ozone Monitor

SKU: OZLAMPAS106M

Includes wiring, connector, and mounting strap.

Lamp Assembly for Model 106-MH Ozone Monitors

SKU: OZLAMPAS106MH

Includes wiring, connector, and mounting strap.

Lamp Assembly for Model 106-H Ozone Monitor

SKU: OZLAMPAS106H

Includes wiring and connector.

Photodiode Assembly and Cable for Model 106 -L, M and MH Ozone Monitors

SKU: PDASSEMBLY106LMMH

With 4-inch wire.

Photodiode Assembly and Cable for Model 106-H Ozone Monitors

SKU: PDASSEMBLY106H

With 6-inch wire.

Absorption Cell assembly for Model 106-L Ozone Monitor

SKU: OZCELLAS106L

Absorption Cell assembly for Model 106-L Ozone Monitor

SKU: OZCELLAS106L

Quartz Absorption Cell Assembly for Early Model 106-L Ozone Monitors

SKU: OZCELL106L (OLD)

Quartz Absorption Cell Assembly for Early Model 106-M Ozone Monitors

SKU: OZCELL106M (OLD)

Absorption Cell Assembly for Model 106-H Ozone Monitor

SKU: OZCELL106H

Replacement optical absorption cell for Model 106-H Ozone Monitor.

LCD Display for Models 106-L, 106-M, 106-MH, and 106-H

SKU: OZDSP106

LCD Display for Models 106-L, 106-M, 106-MH, and 106-H

SKU: OZDSP106

Select Switch for Model 106-L, 106-M, 106-MH, and 106-H Ozone Monitors

SKU: SELECTSWITCH106

Includes external knob (not shown).

Relay Connector for Model 106-L, -M, -MH, and -H Ozone Monitors

SKU: RELCON

External connector to the relay of the Model 106-L, M, MH, and H for controlling processes such as ozone production.

RS232 Breakout Connector, (for 4-20mA and 0-2.5V Analog Outputs) for Model 106-L, -M, -MH, and -H Ozone Monitors

SKU: RS232BRKOUT

Used to obtain voltage and current analog outputs by attaching to the serial port connector.

Serial Cable for Connecting Instrument to Computer

SKU: SERCABL

This straight-through,female-female, 9-pin serial cable is required for RS232 communication with all 2B Tech instruments. Note: Serial cables purchased through electronics stores are usually "cross over" (pins 1 and 3 cross over) and not "straight through" and won't work with 2B Tech instruments.

DEW-Line Consisting of Two Nafion Tubes in Parallel for Humidity Equilibration in Models 106-L, 106-M, 202, 205 and 400

SKU: DEW

Two Dew-Lines are required for the Model 205 Dual Beam Ozone Monitor because of the two flow paths.

External Ozone Scrubber for Ozone Monitors

SKU: SCRBEXT

Used for zeroing any ozone monitor.

Ozone Scrubber (Internal)

SKU: SCRBINT

Cleaning Loop Set for Models 106-L and 106-M Ozone Monitors

SKU: CLEANLOOP106LM

Models 106-L and 106-M Field Kit : Spare parts kit including: 1 Pump, 1 Solenoid Valve, 1 Lamp, 1 External Ozone Scrubber, 2 Internal Ozone Scrubbers, 1 DewLine Assembly

SKU: FIELDKIT106LM